Macrame hanging plant holders have become incredibly popular in home decor, offering a unique touch of bohemian charm. Creating your own macrame plant holder not only allows you to customize the design to match your style but also provides a satisfying and enjoyable crafting experience. In this beginner-friendly guide, we’ll walk you through the step-by-step process of making your very own macrame hanging plant holder. Let’s get started!
- Macrame cord (about 100 feet / 30 meters)
- Measuring tape or ruler
- A small plant pot
- S-hook or wooden ring (optional)
- Wooden dowel or metal ring (optional)
Step 1: Preparing the Macrame Cord
Begin by cutting eight pieces of macrame cord, each measuring around 15 feet (4.5 meters) long. Adjust the length according to your preference and the height at which you want your plant to hang. Trim any frayed ends of the cords to ensure a neat finish.
Step 2: Creating the Gathering Knot
Take all eight cords and fold them in half, aligning the ends. Leave a small loop at the top to act as the hanging point. Secure the loop by tying a simple knot. This loop will serve as the top of your plant holder.
Step 3: Creating the Square Knots
Divide the cords into four pairs. Starting from the top, make square knots by taking the cord on the left side of the first pair and crossing it over the two center cords. Then, take the cord on the right side and pass it over the left cord and under the two center cords. Pull it through the loop created on the left side. Repeat this process for each pair of cords.
Step 4: Forming the Diamond Pattern
Take one cord from the first pair and combine it with one cord from the adjacent pair. Create a square knot using these two cords, leaving a small gap between the two knots you created in the previous step. Repeat this process for each pair of cords, moving from left to right.
Step 5: Creating the Bottom Section
Continue creating square knots until you reach the desired length for the bottom section of your macrame plant holder. Adjust the number of knots based on the size of your plant pot. It’s recommended to place your pot within the holder occasionally to ensure the correct fit.
Step 6: Finishing Touches
Once you’ve achieved the desired length, create a final gathering knot at the bottom, incorporating all the cords. Trim any excess cord below the knot for a clean finish.
Step 7: Attaching the Plant Pot
Slide your plant pot into the macrame holder, ensuring it fits snugly. Adjust the knots if needed to secure the pot in place.
Step 8: How to Hang It
To hang your plant holder, you can either attach an S-hook or wooden ring to the top loop. Alternatively, you can pass a wooden dowel or metal ring through the top loop for a more decorative touch.
Estimated Time: Depending on your familiarity with macrame and the intricacy of your design, this project can take approximately 2 to 4 hours to complete. Take your time, enjoy the process, and don’t hesitate to experiment with different patterns and variations.
Crafting your own macrame hanging plant holder is a rewarding DIY project that adds a touch of nature and artistry to your living space. By following these step-by-step instructions, even beginners can create stunning macrame designs to showcase their favorite plants. Embrace your creativity, have fun, and create a unique macrame plant holder that reflects your personal style. Happy making!